Macro Error - Leaf Photosynthesis MultispeQ V2 protocol
Technical Support and Questions
Habib-ur-Rehman Athar
Mar 2019
While Taking measurements with MultispeQ v 2.0 Firmware 2.0095, Leaf Photosynthesis Protocol MultispeQ 2, I am facing a continuous problem of macro error. This cause a lot of time consumption in the field and frustration without data. Project Title .... Phenotyping F3 Wheat lines (Fsd x S-24) ... https://photosynq.org/projects/phenotyping-f3-wheat-lines-fsd-x-s-24-9c41694c-c6c3-401a-a5a7-be73f3e660b5?hl=Phenotyping+F3+Wheat+lines+%28Fsd+x+S-24%29+
David M. Kramer
Mar 2019
Hi Habib-ur-Rehman Athar!
I found an issue with the macro, where an old code switch disabled a feature that is rarely used. I think I have fixed it. Please open the project and let the macro recalculate the results and let me know. If there is still an issue, we will track it down.
Thanks!
Dave
David M. Kramer
Mar 2019
..by the way, if you receive something like the message you reported, press ACCEPT and you/we can fix the macro so you will not lose data.
Dave
Habib-ur-Rehman Athar
Mar 2019
Hello David M Kramer, Thanks for your response. Now another macro error has been raised. Please look at it.
Habib-ur-Rehman Athar
Mar 2019
Habib-ur-Rehman Athar: Hello David M Kramer, Thanks for your response. Now another macro error has been raised. Please look at it.
Hello David M Kramer, Thanks for your response. Now another macro error has been raised. Please look at it.
Habib-ur-Rehman Athar
Apr 2019
Hello David Kramer, We are facing some errors during taking measurements. But we dont know what is this problem. Or how to define it.
Craig Whippo
Apr 2019
Habib-ur-Rehman Athar: Hello David M Kramer, Thanks for your response. Now another macro error has been raised. Please look at it.
We are seeing the same error message when running the standard Leaf Photosynthesis V2.0 protocol using a MultispeQ V2.0 running the 2.0095 firmware.
This error message goes away when we run the RIDES protocol.
Habib-ur-Rehman Athar
Apr 2019
David M. Kramer: This is what we need: What project? What is your firmware version?
Hello David Kramer. Sorry for responding you late. Firmware version is 2.0095. MultispeQ v 2.0. Project title is PHENOTYPING F4 WHEAT LINES S-24 x Fsd-2008 https://photosynq.org/projects/phenotyping-f4-wheat-lines-s-24-x-fsd-2008/explore